These specialized orthopaedic drill bits (6" length) move and preserve bone rather than remove it from the implant site. The displaced bone becomes densely compacted to the sides and ceiling of the tunnel. Cannulated drill bits allow accurate placement over a guide wire for drilling the tibial tunnel. 3/32 - 2.4 mm size cannula thru drill bit.

The gold-colored tip on the drill bits are 25 mm in length to ensure proper depth of the femoral socket. ACL/PCL compaction drill bits range in size from 6-13 mm and are available cannulated and non-cannulated.

13312      6 mm Cannulated Drill Bit
13312-5   6.5 mm Cannulated Drill Bit
13321      7 mm Cannulated Drill Bit
13321-5   7.5 mm Cannulated Drill Bit
13322      8 mm Cannulated Drill Bit
13322-5   8.5 mm Cannulated Drill Bit
13323      9 mm Cannulated Drill Bit
13323-5   9.5 mm Cannulated Drill Bit
13324     10 mm Cannulated Drill Bit
13324-5  10.5 mm Cannulated Drill Bit
13325     11 mm Cannulated Drill Bit
13325-5  11.5 mm Cannulated Drill Bit
13326     12 mm Cannulated Drill Bit

Close-ups of tip shown below

Designed by Dr. Lanny Johnson, M.D.

Made in USA.